Our Products are manufactured using high grade polypropylene (PP) woven fabrics that are stabilized against UV degradation. Each bulk bag can contain load capacities between 500 kgs to 2000 kgs with a safety of 5:1 or 6:1 (5:1 is for single use and 6:1 is for multiple use), depending on the bag design and size. Optional LDPE inner liner can be included to provide additional protection against moisture ingress.
we are providing an extensive range of customized FIBC bags as per customer requirements as follows

Form-Stable or Baffle Bags

This special Baffle construction offers maximum stability to the bag. There are 4 baffles sewn to the main fabric at each corner to prevent bulging of bag when filled, allowing for a more effective use of the bag’s storage capacity. Four rigid cross corner loops allow the forklift operator to pick up bags without the requirement of additional staff. The Baffle Bag is ideal for light-density products and can be more economical as it increases payload – the larger panel width allows corners to be filled with 25%-30% more product. Another advantage is the increased stackability and with all sewn edges turned to the outside, it reduces potential of contamination
  • Full Loop Bags
These bags, along with required specifications, are coupled with wide range of filling, discharging, and handling options.

U Panel Bags

U-panel bags are fabricated with three body panels – one that runs the full length of the bag making the bottom and two sides and two additional pieces of fabric sewn into the larger piece that form the other two sides. Similar to other construction types, the U-panel bags will maintain a square shape when filled, especially a U-panel bag with baffles. U-panel bags are an industry standard and the most popular type of construction offering high safe working loads (SWLs) and solid durability.


4-panel bags are constructed with four individual pieces sewn together to form a square structure. Typically, 4-panel bags will hold their shape better than the U-panel bags, and U-panel bags will hold their shape better than a circular bag.

4 Panel Bags

Circular Woven bags

A Circular or Tubular bag is woven into a cylinder or tube and cut to the correct size. The most common construction type is a circular fabric on the body with a sewn square base. As there are no seams in this construction, this creates for a more aesthetically pleasing bag, and with only a top and bottom panel sewn into the bag, they are ideal for fine and hydroscopic materials. The tubular body design is also ideal as a liner-less option for fine materials and is recognized for its ease of lifting and manipulating with a forklift.


The Conical Bag is designed specifically to assist in the complete discharge of contents, which are slightly sticky, like brown sugar and premix flour products. The conical shape at the bottom of the bag ensures that the bulk bag can be discharged quickly and easily.

Conical Bags

Garden Bags

We export, manufacture & supply Garden Bags to the agriculture sector. Garden bags are used to carry garden waste and make it possible for green waste to breathe. We have this bag as a solution to customers, who want to collect their garden waste and recycling that again. This bag is an environment-friendly product for agricultural use.
TwoLoop Bags are widely accepted as being more cost-effective than the traditional 4- Loop Bags used. Compared to the standard four loop bags, these bags have a different construction.
The body-fabric of the bag itself is extended into a lifting loop which gives the bag a higher breaking strength and makes the FIBC easier to lift. The loops can be wrapped with coloured sleeves which provides assistance in separating different bags as per their application. An inner liner is usually incorporated to keep the product being carried both clean and dry. These bags find their usage primarily in the agricultural sector but are also used for storing and transporting goods like powders and minerals.

Two Loop Bags

Single Loop Bags

The Single Loop bags are very cost-effective and suitable for bulk handling solutions. These are ideal for storing larger volume and high capacity contents like fertilizers, fish-feed, cement, seeds, chemicals, minerals, food grains, etc. These bags are made using the same material,i.e.,
Polypropylene and are available in both inner liner and outer liner options.
A variety of different designs of both the outer bag and the liner are available, i.e., filing and discharge spout, tray-based, suspended liner, multi-trip, UN approved for hazardous goods, etc.
Tunnel Loop FIBCs are becoming more and more popular not only in the building trade but in many other industries as well. Tunnel loop FIBCs are the latest design of builder bags where 2 side tunnels are provided together with the usual standard four loops.
The benefit of the side tunnel is it allows one person to handle the FIBC with a forklift, reducing labour costs and time when filling and handling.

Tunnel Bag

Filling Systems
  • Open Top with Hem –
  • Duffel Top Skirt –
  • Filling Spout with Flap
  • Tie – Down Flap
  • Open Top with Drawn Cord
  • Filling Spout
Discharge Systems
  • Discharge Spout
  • Discharge Spout with Iris Protection
  • Discharge Spout with Protection Flap
  • Discharge Spout with Petal Closure
  • Full Drop Bottom
  • Conical Bottom